Hettich Marketing- und Vertriebs GmbH & Co. KG · Vahrenkampstraße 12 -16 · 32278 Kirchlengern · Téléphone + 49 52 23/77-0 · www.hettich.com
Hettich Marketing- und Vertriebs GmbH & Co. KG · Gerhard-Lüking-Straße 10 · 32602 Vlotho · T49 5733 798-0 · www.hettich.com
6
1
1
2
2
3
4
4
The function provides an easy way of adjusting the desk top to a higher
position. To do this, proceed as follows:
The function provides an easy way of adjusting the desk top to a lower
position. To do this, proceed as follows:
Press the
and keep it pressed until the desk
desk top up button
top reaches the height you want.
Press the
and keep it pressed until the
desk top down button
desk top reaches the height you want.
Upward desk top movement
Upward desk top movement
Downward desk top movement
Downward desk top movement
Memorising a desk top position
Display LegaDrive Touch
Display is locked
(key symbol)
Activating and deactivating by swiping to the left or right.
Move the desk top to any position in the lower half of the
travelling range to deactivate the pedestal stop or to any
position in the upper half of the travelling range to
deactivate the shelf stop. To do this, use the
desk position
down
desk position up
or
buttons until the chosen position
is reached.
Move the desk top to the position you wish to use as the new
pedestal stop / shelf stop position.
To do this, press the
or
desk position down
desk position up
buttons until the chosen position is reached.
Pedestal stop and shelf stop positions
Pedestal stop and shelf stop positions
1.
1.
These two features can be used to limit the desk's travelling range (e.g.
where a pedestal is standing under the desk). A pedestal stop position can be
set in the lower half of the travelling range, a shelf stop position in the
upper half. If a pedestal stop position is set, this is used as the new end
position; a shelf stop position functions as a new upper end position for the
travelling range.
To
a pedestal stop / shelf stop position, proceed as follows:
deactivate
To
a pedestal stop / shelf stop position, proceed as follows:
memorise
Note
These steps must be performed separately for a
pedestal stop position and a shelf stop position.
Simultaneously press the
and
desk position up
desk position
down
buttons and keep both buttons pressed for approx. 10
seconds. The control unit clicks
when the position has
once
been deactivated.
Simultaneously press the
and
desk position up
desk position
down
buttons and keep both buttons pressed for approx.
10 seconds. The control unit clicks
the position
twice once
has been memorised.
2.
2.
or
or
and
and
3
Memorising a desk top position
This function memorises a defined desk top height (one desk top height can
be memorised per
). To memorise a desk top
memory position button
position, proceed as follows:
Move the desk top to the desk top position you want.
2
Press the
save button.
The display shows
.
S –
Press the chosen
(e.g. 2).
memory position button
The display shows
.
S 2
The desk top position setting will now be memorised on the
memory position button
selected. You will hear the control
unit click twice and the memorised desk top position will be
displayed after approx. 2 seconds.
The display shows this position (e.g. 73cm).
5
Plug detection
6
7
Auto Detect Number of Drives
Changing desk height unit (cm or inch)
9
Returning control unit to factory settings (S0 menu)
8
Manual reset
SAVE
en
