HETEC V-IP, Инструкция по установке и эксплуатации

Страница: 29 / 102

Chapter 4. Configuration
For a PS/2 mouse choose Auto Mouse Speed. For XP disable the option “ en-
hance pointer precision ” in the Control Panel.
Note: The remote mouse is always synchronized with the local mouse if selecting
the option “ MS Windows 2000 or newer ” .
SUN Solaris
Adjust the mouse settings either via “ xset m 1 ” or use the CDE Control Panel
to set the mouse to “ 1:1, no acceleration ” . As an alternative you may also use
the Single Mouse Mode.
MAC OS X
We recommend using the Single Mouse Mode.
OS/2
We recommend using the Single Mouse Mode.
Linux First, choose the option “ Other Operating Systems ” from the the Mouse
Type selection box. Second, choose the option Auto Mouse Speed. This
applies for both USB and PS/2 mice.
Video Modes
The V-IP recognizes a limited number of common video modes. When running X11
on the host system please do not use any custom modelines with special video
modes. If you do, the V-IP may not be able to detect them. We recommend using any
of the standard VESA video modes instead. Please refer to Appendix C for a list of
all supported video modes.
Resetting the V-IP to its Factory Settings
Using the Serial Interface
Reset the V-IP and immediately press the “ ESC ” key. On your screen a command
prompt “ => ” will be visible. Enter “ defaults ” , press the “ Enter ” key and wait
for a few seconds for the V-IP to reboot. Now, you may use the default settings as
described in the Section called Initial Configuration .
21