hestan KDW series, Инструкция по использованию и уходу

Страница: 19 / 76

OPERATION
(CONT.)
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher’s water softener can be adjusted to suit the hardness of the water it is supplied
with. The hardness is set using the Select (program selection) button.
To access the setting function, hold the Select button down for 15 seconds. The ADD Salt
indicator light flashes, while the Selected Program indicator lights show the current setting.
Each press of the Select button changes the setting following the sequence in the table below:
Contact your local water board for information on the hardness of your water supply.
After adjustment or display of the current setting, simply do not touch the button for a few
seconds; the dishwasher will automatically return to standard mode, ending the adjustment
mode
.
Crystal
Delicate Daily Wash
Super/
Sanitize
Soak Salt Rinse Aid Select
ADD
Crystal
Delicate Daily Wash
Super/
Sanitize
Soak Salt Rinse Aid Select
ADD
WATER HARDNESS TABLE
WATER HARDNESS
SETTING
All lights off
One light on
Two lights on
Three lights on
Four lights on
Five lights on
Two lights on
German
degrees (°dH)
French
Degrees (°dF)
PPM
0-6
7-10
11-15
16-21
22-28
29-35
36-50
0-11
12-18
19-27
28-37
38-50
51-62
63-90
0-107
125-178
196-267
285-374
392-498
516-623
641-890
©2019 Hestan Commercial Corporation
17
EN