➥
To remove a phone number:
While the number is displayed, hold down the “0"
button for 2 seconds. At first, the ”0" appears in the display. After 2 seconds, it returns
to the phone number menu, “TEL #x ” is displayed. When this number is examined
again, “NOT PROGRAMMED” is displayed.
➥
To return to the installer’s main menu:
Press the [
✱
] button while “TEL #x”
is displayed.
INSTALLER CODE menu
The default installer code is 123456.
To display the code currently programmed
To display the currently programmed installer code, use the arrow keys to move up and
down the main menu until INSTALLER CODE is displayed. Press
[
#
]
to display the code.
To change the code
Any code length up to 6 digits can be programmed. Enter the new code. To confirm
the entry press
[
#
]
. It then returns to the main menu. To cancel the entry and start
over, press [
✱
]. To return to the main menu press [
✱
] again.
USER CODE menu
This is programmed the same way as the installer code. The default user code is 987654.
To display the code currently programmed
To change the user code, use the arrow keys to move up and down the main menu until
USER CODE is displayed. Press
[
#
]
to display the code which is currently programmed.
To change the code: Any code length up to 6 digits can be programmed. Enter the new
code. To confirm the entry press
[
#
]
. It then returns to the main menu. To cancel the entry
and start over Press [
✱
]. To return to the main menu without changing the code press [
✱
]
again.
➥
NOTE:
The installer and user codes should be different. If they are both the same,
it will be accepted as the installer code putting it into the installer programming mode.
Informa 300 Voice Message Communicator
15
