HERZ 3 F799 06
Page 4
User program edition
If you select a built-
in program ”U1 to U4” and press (Ok) you will enter in user program edition.
Use (◄) or (►) keys to slide the blinking cursor position in the day and modify or correct easily
the program. When the displayed day is correct, press (Ok) to jump to the following day. When
you’ll press (Ok) on day 7, your program is finish and validate.
Now your user program will be followed in
operating mode.
Special functions
HOLIDAY Function:
With (◄) & (►) keys, go to
function.
Then select with (+) & (-) keys the delay in hours ( H ) if below 24h then in days ( d ). Then select
a mode
or
or
.
The
logo is active and the number of hours/days left is displayed until the MILUX RF returns
in
mode and continues to follow the program.
KEYPAD LOCK Function:
Function to prevent any modification of the parameters.
In
,
,
,
and
operating modes you can maintain the (Ok) key pressed and
press simultaneously on the (+) or (-) key to lock
(
) or unlock (
) the keypad.
RESET Function:
Erase all user programs and sets the factory parameters by default.
Go to
mode, maintain the (Ok) key pressed 10s. All segments will show during a few seconds
showing that the
MILUX RF
has been erased and restarted with factory defaults parameters.
Factory parameters are: Temperatures
21°C
17°C
6°C, Program U1 all comfort.
Heating or cooling Function:
Your
MILUX RF
could be use to manage your cooling installation.
To change the regulation mode of your
MILUX
RF
, move the operating mode cursor to the comfort
mode
. Then maintained the (Ok) key and press the (◄) key. Normally one of the following
screens is displayed.
Use (+) or (-
) to change the regulation mode, press (►) to exit this submenu.
Remark: In
COLD
mode the antifreeze function is removed.
