Page 5
HERZ Roomtemperature thermostat
First installation
This section will guide you through the set up of your thermostat for the first time.
Batteries installation
• Open the two side covers and insert the 2 AAA alkaline supplied batteries (or remove the small protection
sticker, if the batteries are already installed in the compartment)
• Close the two side covers.
• Now your thermostat will propose you to adjust the current time and date.
Time and date adjustment
Each time a value flashes, you can adjust it with the
(-)
and
(+)
keys, once the value is chosen, confirm it with the
(OK)
key. The thermostat will jump automatically to the next value.
Note:
You can always come back to the previous value by pressing the escape key ( ).
List of the order time and date adjustments
Time and day:
Adjustment of the hours
Adjustment of the minutes
Adjustment of the day (1 = Monday)
Date:
Adjustment of the day number
Adjustment of the month number (01 to 12)
Adjustment of the year
When the message
“Save”
and the blinking green LED appears, press
(OK)
to confirm the adjusted time and date.
You can always reach the time and date adjustment, by pressing and maintaining the edition key during 2 seconds
in normal operating modes.
