Herutu TW-800R-SLNX Скачать руководство пользователя страница 19

Страница: 19 / 32

TW-800R-SLNX

⚫

[Double count protect time] Double count prevention time setting

The receiver can disable the signal from the same transmitter for a period of time after receiving the

signal from the transmitter. This time is called the double count prevention time.

When the receiver receives a signal from the same transmitter during double count prevention time, the

receiver does not process the signal and transmits a “BUSY” signal to the transmitter.When the

transmitter receives the “BUSY” signal, the green LED blinks 4 times.

Available from the following 19 different time settings.

10ms / 100ms / 200ms / 500ms / 1s / 2s / 3s / 4s / 5s / 6s / 7s / 8s / 9s / 10s / 11s / 12s / 13s / 14s / 15s

Default:

100ms

Example) Action performed when double count prevention time is set to 200ms

Double counting is prevented for 200ms from when a signal is received from the transmitter.

Note

Do not set the double count prevention time shorter than the external output time.

Even when the receiver receives a signal from the transmitter two times, two external outputs may be

generated without interruption, depending on the setting or receiving timing. LAN output is performed

respectively.

Example) Action performed when output time is set to 200ms and double count prevention time is set to

100ms.

When receiving a signal from the transmitter, the receiver starts to generate an external output. When the

receiver receives a signal from the same transmitter during external output (140ms after starting the

external output), an external output is continuously generated for 200ms from that point, without the external

output turning OFF.

100ms

External output ON

External output OFF

Receive

200ms

Double count prevention

External output ON

External output OFF

Receive

Double count prevention

100ms

140ms

200ms

Содержание TW-800R-SLNX

































Результаты поиска

Содержание TW-800R-SLNX

Отзывы:

Бренды по названию

Популярные бренды

Herutu TW-800R-SLNX, Инструкция по эксплуатации

Результаты поиска

Содержание TW-800R-SLNX

Отзывы:

Бренды по названию

Популярные бренды