Herutu TW-800R-EXL, Руководство пользователя

Страница: 14 / 28

TW-800R-EXL
12
■Setting
It needs doing
“pairing” a transmitter and a receiver before using. The number of transmitters which can
register pairing to one set of a receiver does not have restriction.
ID number of receiver is memorized in transmitter. Transmitter transmits the signal included ID number of
receiver. Receiver can receive the signal attached ID number itself.
●Pairing (Registration)
1. Power Switch is turned on pushing the lighting switch.
To enter “Pairing mode” only 10 seconds with flashing the lighting switch for pairing.
2. You continue pushing the “pairing switch” over 3seconds of transmitter by a long and slender thing.
3. It is completed the pairing between transmitter and receiver, then the lighting switch of receiver is
turned off.
4. It can communicate with transmitter being pairing, you turn off the power switch of receiver once.
It needs to do a
“Pairing” for every transmitter when you need to register a number of transmitters.
●Delete the pairing
At receiver is not
“Paring situation”, transmitter cancels the paring information (registration information on
a receiver) when the paring switch is pushed over 3 seconds continuously. By this operation, transmitter
can not communicate a receiver is registered
“Paring”.
The lighting switch for pairing.
Power switch
Pairing switch