Herutu TW-800 Series, Руководство по эксплуатации

Страница: 12 / 33

TW-800
10
■ Installation
<Installation the transmitter to torque wrench>
To install the seat
Fix the Seat with four fixing screws.
For the application with heavy oil mist, fill up the caulking agent between Wrench seat and Seat and also between
Wrench shaft and Wrench seat to protect the internal board.
Fix the Transmitter Limit SW with two hexagon socket head bolts(which was removed).
Verify that the moving range of wrench lever is well suited for the movement range of switch during the wrench
in movement.
Hook the Transmitter on the Case holder of Seat, set it with an attention being paid not to bite the cord, and fix it
with the set screw as firmly pushing the case.
Apply the screw locking agent on 2 to 3 threads of
hexagon socket head bolt.
Wrench lever
Apply the screw locking agent
onto the 2 to 3 threads of screw
edge.
The hexagon socket head bolt requires a washer.
It hooks on a case fixed nail
×4
×2