background image

 

 

9

 

Guarantee 

7.

Guarantee  

This product passed it by our close product inspection. When it broke down under the normal use   

of a visitor by any chance, we will repair a trouble point according to a rule, please report to a   

store of purchase. However we are limited to hardware of this product. 

In addition, we become charged repair in the case of next even if I put it before a term of a 

guarantee. 

1. In the case of trouble / the damage that occurred because the handling was not reasonable of 

a visitor such as a fall at the time of the transportation / movement by a visitor, a shock. 

2. In the case of trouble by the resolution and remodeling of the main body by a visitor. 

3. In the case of natural calamities in heaven and earth such as a fire / an earthquake / a flood 

and trouble / the damage by abnormal voltage. 

4. In the case of trouble / the damage due to trouble of machinery except our designated 

machinery connected to this product. 

5. Accessories (AC adapter, an antenna, a connection cable) except the main body do not include 

it. 

6. In the case of the trouble that occurred by the handling against usage mentioned in this 

instruction manual and instructions. 

 

 

The guarantee certificate is attached on this product. Confirm the prescribed contents, and 

carefully keep it.   

 

The guarantee period is one year.( The guarantee certificate is not attached on this product.) 

 

We will repair during the guarantee period according to the guarantee provisions without 

charge.   

 

For the repair after guarantee period, consult the outlet store through which you purchased or 

our sales office. 

 

If the function can be preserved by the repair, we will repair it at some costs on the customer 

request.  

 

As a principle, regardless of the guarantee period, the defect product should be brought into 

our company because the measuring instrument is required for adjustment during repair. 

Besides, the customer shall bear the transportation cost incurred during transferring to our 

company. 

If you need official trip repair or replacement machine during guarantee period, consult the 

outlet store through which you purchased or our sales office.   

 

 

Содержание POKAYOKE TWF-600R

















Отзывы: