Herutu 21UD, Инструкция по эксплуатации, Страница: 70 / 84

21UD
62
Applied operation
[Register screen of setup time]
＊ ＊ ＊ ←
Present data (Setup time)
3
④
Input the Setup time of the first work (Reserve No.1).
<e.g.>For 15min, input [1] and [5] in this order.
[Register screen of setup time]
1 5
←
Input data (Setup time)
3
Press [ENT] key to register the setup time.
If you have inadvertently pressed a wrong data, press [CLR] key and input [1] and
[5]in this order once again and then press [ENT] key to register the setup time. If
setup time is not required, input [0] and press [ENT] to register the setup time of
“0”.
If [ENT] key is pressed without inputting anything, carry out No.2 register screen
without being registered.
⑤
Input
“Tact”, “Target production quantity” and “Setup time” for Reserve No.2 and onward
according to the aforementioned procedures.
For less than 20 in registered work quantity, if one condition among
“999 of setup time”,
“0 of tact” or “0 of production actual” for the next Reserve No. is satisfied in final register
screen, it means that registration is completed, so that the subsequent registered
contents are ignored.
<Clear processing>
[Clear]
terminal
Within working
hour
Plan/Actual is cleared and calculation is started from the present
time according to the tact of current reserve No.
Other than
working hour
Work of Reserve No. 1 is set.
[CLR] key
Pressing once
within
working
hour
Plan/Actual is cleared and recalculation is carried out up to the
present time according to the tact of the current reserve No.
Pressing twice
within
working
hour
Plan/Actual is cleared and calculation is started from the present
time according to the tact of the current reserve No.
Other than
working hour
Work of Reserve No. 1 is set.