Herutu 21UD, Инструкция по эксплуатации

Страница: 35 / 84

21UD
27
5-5. Setting with or without working hours Command [5]
Set with or without working hours.
Setting Contents
Yes
Planned calculation is carried out based on the registered contents of working hour.
Register the working hour with the [5] key in normal screen.
No
The working hour cannot be registered. When signal from outside signal (Stop/Operating
terminal) is ON, planned calculation is carried out.
Recalculation function after returning to the beginning of working hour is not available.
①
Select [5] key and then press [ENT] key, and the
“Working hour with/without setting
screen
” appears.
If there is no need to change the setting contents, press [ENT] key to get back to the
Command selection screen.
5
←
Display about 0.75seconds
↓
0
←
present data
②
Input optional setting value .
1
←
input data
③
Here, press [ENT] to set the type, and Command selection screen comes back.
If you have inadvertently press a wrong type No, press [CLR] key to get back to the
status of
①
or overwrite the correct No to modify.
*When
“No” for use of working hour is set, both “During setup” output and “During stop”
output functions are disabled.
Function settings
With or without working hours
０→
without working hour
１→
with working hour