![Hertz HDP 5 Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/hertz/hdp-5/hdp-5_advanced-web-manual_2127034009.webp)
9
TOP PANEL CONTROLS: SWITCHES AND ADJUSTMENT CONTROLS
HI FULL
HI FULL BAND
ON OVL
TH SPK
5CH 3CH
1
3
4
2
5
max
1
3
4
2
5
max
1
3
4
2
5
max
80
3.3k
160
800
MODE
LEVELS PASS MODE
PASS MODE
40
150
70
120
40
150
70
120
HI PASS
80
3.3k
160
800
LO PASS
A - ch
HDP5
B CH LEVELS (0.3 ÷ 5V):
B channels input sensitivity
adjustment control. Set to 1 position. Use a CD as source,
increase head unit volume until output distorts, then increase
volume by 1 step in order to eliminate distortion. Turn LEVELS
up until sound becomes distorted and then turn LEVELS down
a bit for optimum sound.
PASS MODE (HI - FULL):
B channels filter switch. Select
FULL to drive full range power outputs. The full frequencies
bandwidth will be output to power output connectors.
Select
HI for Hi-pass to drive a MIDRANGE / TWEETER.
HI PASS (80 Hz ÷ 3.3 kHz):
B channels HI-PASS crossover
point adjustment. Rotating the knob you can select any
frequencies between 80 Hz and 3.3 kHz. The frequencies
below crossover point will be attenuated at 12dB/Oct.
SUB LEVEL (0.3 ÷ 5V):
SUB channel input sensitivity
adjustment control Set to 1 position. Use a CD as source,
increase head unit volume until output distorts, then increase
volume by 1 step in order to eliminate distortion. Turn LEVELS
up until sound becomes distorted and then turn LEVELS down
a bit for optimum sound.
REMOTE VOLUME CONTROL (ON - OFF):
Activate
ON or
deactivate
OFF external remote volume control for SUB channel.
Connect external adjustment control to front panel proper
connectors.
LO PASS (40 Hz ÷ 150 Hz):
LO-PASS crossover point
adjustment of A channels band-pass filter. Rotating the knob
you can select any frequencies between 40 Hz and 150 Hz.
The frequencies above the crossover point will be attenuated at
24dB/Oct.
A CH LEVELS (0.3 ÷ 5V):
A channels input sensitivity
adjustment control. Set to 1 position. Use a CD as source,
increase head unit volume until output distorts, then increase
volume by 1 step in order to eliminate distortion. Turn LEVELS
up until sound becomes distorted and then turn LEVELS down
a bit for optimum sound.
PASS MODE (HI - FULL - BAND):
A channels filter switch.
Select
FULL to drive full range power outputs.
The full frequency bandwidth will be output to power output
connectors. Select
HI for Hi-pass to drive a WOOFER.
Select
BAND for bandpass to drive a WOOFER or a MIDRANGE.
HI PASS (40 Hz ÷ 150 Hz):
A channels HI-PASS crossover
point adjustment. Rotating the knob you can select any
frequencies between 40 Hz and 150 Hz. The frequencies below
the crossover point will be attenuated at 12dB/Oct.
LO PASS (80 Hz ÷ 3.3 kHz):
A channels LO-PASS crossover
point adjustment. Rotating the knob you can select any
frequencies between 80 Hz and 3.3 kHz. The frequencies above
the crossover point will be attenuated at 12dB/Oct.
MODE (3CH - 5CH):
Switch for 3 channel or 5 channel
amplifier mode. Select 5CH for A + B + SUB channel system
(example: Front - Rear - Sub). Select
3CH for A (Dual Mono)
+ SUB system.
ON:
Power LED. It lights up when you turn on the amplifier. If
all LEDs (12) (13) (14) (15) turn on at the same time, the amplifier
will shut down and you will have to contact a service centre.
TH:
Thermal status LED. It lights up when thermal protection
is active, above 85°C. The amplifier shuts down until the chassis
temperature goes below 75°C.
OVL:
Overload status LED. It lights up when overload occurs
on the power output terminals. The amplifier goes in muting for 3
seconds and this LED starts flashing until you turn off the amplifier.
REMOVE THE CAUSE OF OVERLOAD.
SPK:
Speaker status LED. It lights up when a speaker touches
car body. The amplifier goes in muting for 3 seconds and this
LED starts flashing until you turn off the amplifier.
REMOVE THE CONTACT BETWEEN SPEAKER WIRE
AND CAR BODY.
1
2
3
4
5
6
7
8
7
8
9
10
11
12
13
14
15
9
10
11
14
12
13
15
1
3
4
5
6
2
HI PASS
SUB
LEVEL
REMOTE VOLUME
CONTROL
OFF ON
LO PASS
LEVELS
B - ch
HDP 5
Advanced Web Manual
Содержание HDP 5
Страница 1: ...www hertzaudiovideo com Release 1 1 Revisione1 1 UK IT HDP 5 ...
Страница 23: ...23 ...
Страница 30: ...30 COME RUOTARE IL LOGO HERTZ 180 PUSH Remove and Rotate 180 1 2 3 4 5 6 7 8 9 HDP 5 Advanced Web Manual ...
Страница 45: ...45 ...