Herth+Buss Reanimator 1900, Руководство пользователя

Страница: 29 / 52

Operating Instructions 95980701 | -702
29
EN
5. Using a wrench, remove the first nut and
bolt securing the fuse on the positive ca-
ble. Repeat the same steps for the second
nut and bolt. Remove the open fuse and
replace it with a new one of the same type
and rating.
6. Tighten the nuts and bolts to secure the
fuse, and then replace the cover of the fuse
holder.
7. The unit is now ready to use.
9. Maintenance instructions
9.1 Cleaning and user maintenance should
not be done by children without supervision.
9.2 Unplug the charger from the Reanimator
and the mains power before attempting any
maintenance or cleaning.
9.3 Use a dry cloth to wipe all battery cor-
rosion and other dirt or oil from the charger,
battery clamps, cords and the Reanimator
case. Do not use cleaning fluids.
9.4 Ensure that all of the components are in
place and in good working condition.
9.5 All other servicing should be performed
by qualified service personnel.
9.6 If the supply cord is damaged, it must
be replaced by the manufacturer, its service
agent or similarly qualified persons, in order
to avoid a hazard.
10. Moving and storage
instructions
10.1 Store the Reanimator and charger in an
upright position, inside, in a cool, dry place.
10.2 Always make sure the Reanimator is
fully charged before storing. When not us-
ing it for long periods of time, recharge the
Reanimator every 30 days.
IMPORTANT
Do not use and/or store the Reanimator
in or on any area or surface where
damage could occur if the internal
battery should unexpectedly leak acid.