T-BT Battery powered
wireless thermostat
Pairing the T-BT with the Heater
1. Double press the Pairing button on the SMART-R box of the heater. The green
pairing status LED will start to flash and the heater is ready for pairing.
2. Press the Power button on the T-BT to turn the unit off.
“OF”
is shown on the
display.
3. Long-press the SET button on the T-BT and the word
“PAIR”
will flash on the
display.
4. When pairing has completed successfully, the green pairing status LED on the
SMART-R box will become a steady green and the word
“PAIR”
on the T-BT will
disappear.
5. You should not experience any difficulty in pairing, but in case you do, please
ensure the T-BT and Heater are within range of each other and try the above
process again.
6. Press the Power button on the T-BT to start using it to control the heater.
Setting Time & Calibration
Operating Instructions
1. Press the SET button on the T-BT for 5
seconds to enter the settings mode. Day 1
of the week will begin to flash on the
display.
2. Use the + or - keys on the T-BT to set the
day of the week. (e.g. if 1 is Monday and
today is Wednesday, press + until 3 flashes
in the display.)
3. Press SET again to advance to change the minutes and use the + or
–
keys again
to adjust.
4. Press SET again to advance to change the hour and use the + or
–
keys to adjust
(it is a 24 hour clock).
5. Press SET again to Calibrate the temperature of the T-BT to match another
thermostat. Calibration is not usually necessary and we explain its use later. If
you need to Calibrate, perform this step here.
6. The T-BT automatically saves your changes as you enter them.
