T-BT Battery powered
wireless thermostat
For free-standing use (for example placing on a shelf):
1.
Gently open the T-BT case using a flat headed screw driver.
2.
Insert 2 x AA Batteries (not supplied).
3.
Place the front face of the T-BT over the rear casing ensuring the vents on the
rear casing are at the bottom (see diagram below) and snap shut.
Wall Mounting
1. Gently open the T-BT case using a flat headed
screw driver.
2. Use the rear of the casing as a template for
marking your mounting holes and drill the
holes.
3. Insert rawlplugs (not supplied).
4. Gently screw the rear casing of the T-BT onto
the wall. The vents in the rear casing must be
at the bottom. (See diagram below).
5. Insert 2 x AA Batteries (not supplied).
6. Place the front face of the T-BT over the rear
casing and snap shut.
T-BT can be wall-mounted or free-standing
Free Standing
If possible, position the T-BT at least 2m away from the Herschel XLS heater.