ENGLISH
Table 1. Electrical Specification
Model
MALIBU 2000
Voltage
220
–
240V
Rated Power
2000 Watts
Current
8.7 amps
Frequency
50 Hz
Cable Colour
Brown, Blue, Yellow/Green
Be careful to ensure that the cable does not become a trip hazard.
Colour coding used in the supplied mains cable:
BROWN wire is to be connected to LIVE (‘L’), the BLUE wire to NEUTRAL (‘N’) and the GREEN/YELLOW wire
to EARTH (‘E’).
ASSEMBLY:
Secure the base to the heater using the screws
provided.
POSITIONING:
The Herschel MALIBU is a portable middlewave infrared heater designed for gentle heating of people in
close proximity to it. Be careful not to touch the surface of the heater during operation and let the heater
cool down fully before moving. DO NOT COVER THE HEATER. KEEP THE HEATER AWAY FROM ANY
COMBUSTIBLE MATERIALS.
The MALIBU has tip over protection and will switch off if it falls or gets knocked over. Place the heater on a
firm level surface.
CAUTION:
•
Ensure mains power is OFF and the unit is cool before handling.
•
Heater must not be located immediately above or below a socket outlet.
•
Be careful to ensure that the mains power cable does not become a trip hazard and cannot be pulled
by small children.
•
DO NOT
position the
heater where it can heat up its own power lead.
•
Do not leave the heater unsupervised.
•
Do not let children play with or touch the heater.
•
Do not use in rain or bad weather.
•
To avoid breaking the lamp handle the unit carefully.
•
Use the handle to move the heater and only move when the heater is off and has cooled down.
