T2 Wireless thermostat
•
Press MENU again to display the ECO mode
temperature. Change the
temperature using the Up and Down buttons.
“SET”
is displayed indicating you
have hanged the setting.
•
Return to the main page by pressing the Return button.
To select a mode at any time, press the MENU button. This selection will override the
schedule or current temperature setpoint. For example, by selecting Eco mode (using
the MENU button) the T2 can maintain a lower holiday temperature setting until
another mode is selected.
Program Mode
The T2 has a 7 x 1 day timer (Monday to Sunday) with 4 periods per day. Set period 1
as the first temperature of the morning, period 2 is the fallback temperature for the
daytime. Period 3 is the temperature required for the evening and period 4 is the
overnight temperature.
Unlike conventional heating, Herschel Far infrared directly heats the room (the
“Thermal Mass”)
. For areas in frequent use it is more economical to avoid
temperatures dropping too low as the heater will need to be on for a much longer
period to restore temperatures. We recommend overnight setback temperatures of
no lower than 14
°
C and daytime temperatures of 16
°
C and above.
To select Program Mode press MENU until PRG is displayed as the mode. The
schedule will then operate until another mode is selected.
All days
Period 1
0630 21
℃
Period 2
0800 18
℃
Period 3
1800 21
℃
Period 4
2230 16
℃
To alter this schedule:
•
Press the PRG button for 3 seconds to
start the 7 x 1 day program setting.
The First period of the First day is
selected.
•
Press the Up or Down button to
change the time of the first period of
the
day’s
program.
•
Press PRG again to move to the
temperature setting of the first period
and use the Up and Down buttons to
adjust the temperature.
