Herni
IV. Using the optional accessorie
4.1 ISOFIX-Adapter
Fitting advice:
1. Please ensure that your supplying dealer/fitter gives
you instruction in the use and adjustment of the seat.
2. Open the grub screws
(2 each side) and remove the
ISOFIX by pulling outward.
3. First adjust the recline (see 3.3) to the required
position. Then push the car seat including the
ISOFIX
towards the ISOFIX brackets (the vehicle
•
ISOFIX latch system) ensuring an audible latch (click,
click) each side.
4. When the seat is fitted there should be no gap
between the top of the backrest and the vehicle seat
backrest, if a gap exists this will lead to instability,
rocking and possible damage to the seat mechanism.
5. Tighten the grub screws (2 each side)
on the
receiving tubes. After latching and to prevent
inadvertent opening of the ISOFIX latches, simply
tighten the thumb screws
clockwise each side.
6. NOTE: Ensure that the ISOFIX is latched securely on
both sides.
Removal advice:
1. Undo the thumb screws
anti-clockwise and pull the
thumb screws forward away from the vehicle backrest
to un-latch.
2. Now you can remove the car seat from the vehicle.
• Page 8 •
•