4.5 abduction block
1. The adduction block aids the distance between
your child´s knees. Before adjusting the 5-point-
harness the abduction block should be removed.
To remove, loosen the quick-release lever
and
pull the block up.
2. The abduction block must be fitted close to the
cover as shown. The depth can be adjusted using
the appropriate bracket mounting holes.
•
3. Use the abduction block during the whole journey
to avoid injuries.
4. The position of the quick-release lever can be
changed after tightening by pulling it outward, then
swiveling.
IMPORTANT: to avoid injuries being caused
- Ensure that the quick-release lever is turned to an
upward or downward position and NOT sideward!
4.6 extra angular adjustment
1. Where the tilt of the standard recline position
is
not enough, it can be increased by using the
(optional) extra angular adjustment. To adjust,
remove the fixing screw and nut each side ,
•
chose a tilt position, refit and tighten the fixing
screws. NOTE: Use of the cap nut is compulsory.
2. For safety-related reasons a quick-release lever
cannot be used for these adjustments!
Herni
IV. Using the optional accessories
• Page 11 •
•
•