Hernik 4170-0010-020, Руководство пользователя

Страница: 6 / 20

1.8 Installation in the car
 Place the child seat on the vehicle seat. Make
sure that the backrest lies flat against the
backrest of the vehicle seat.
Tip! If the headrest of the vehicle seat disturbs,
remove it.
1.9 Fixing the child in the car seat
 Open the 5-point-belt and

make sure that the straps are exposed.

If a swivel adapter is available, rotate the
car seat. This makes it easier for you to put the
child in the car seat.
 Swivel the optional thorax pads out by

pressing the red dots.

Put the child in the car seat.

Close the 5-point belt.

 Rotate (if swivel adapter is available)
the car seat back until the locking audibly snaps
into place.

Now thread the 3-point seat belt into the
belt guide and guide the belt through the

open belt guide left/right.

 Lay the belt over the child and the car seat
and thread it on the other side left/right through
the second open belt guide . Snap the seat belt

buckle tongue in the car‘s belt buckle.
Make sure that the vehicle belt is not twisted.
Otherwise the full protective effect of the restraint
system is not given.
ATTENTION! Instructions on how to correctly adjust the headrest, the belt guide
and the ISOFIX can be found later in the user manual under point 3.1, 3.4 und 4.1.
Herni
I. General information
• Page
6
•




