3
1
Remove the table lock group and put the
sealing ring into the groove to the
bottom of the faucet, then screw the
shank to the bottom thread of the faucet
body, then insert the whole part into the
table hole.
2
Set up table lock group through the
water inlet hose respectively to the main
faucet and tighten them on the shank of
the main body, and tighten the two
locking screws with a screwdriver.
Table
Table
3
After finishing the faucet installation,
connect the inlet angle valve according
to the item 5 connection diagram of the
cold/hot water inlet hose and angle
valve.
Installation Instruction
Table
