Hermes RT 100 D, Руководство по эксплуатации

Страница: 6 / 6

7 6
Program Controller RT100D
switch:
Prog
switch:
please press this switch a few times ,
if you get the right program number on
the display please stop pressing the key.
switch: start/stop
Program will start
Here you find the list of the fixed programs:
Programm No: 7 - 9 are all zero.
Descprition:
All time values are in hours and minutes.
0h30 = 0 hours and 30 minutes
Zeit 1: delay time
Zeit 2: ramptime
Temp 1: first set point
Temp 2: top temperature
Zeit 3: soak time
Programm
Nr.
1 2 3 4 5 6
P1 P2 P3 P4 P5 P6
Zeit 1 0h 00 0h 00 0h 00 0h 00 0h 00 0h 00
Zeit 2 4h00 5h 00 7h 00 10h 00 3h 00 4h 00
Temp 1 500°C 500°C 500°C 930°C 400°C 400°C
Temp 2 1230°C 1230°C 1230°C 1230°C 800°C 800°C
Zeit 3 0h 30 1h 00 1h 00 1h 00 0h 30 1h 00
3.2 Program Adjustment
If you like to adjust program datas you should use the following description:
Please load and start your programm ( see section 3.1) and press the following switches:
switch: start/stop
switch:
⇒
please press this switch a few times if the
right data is displayed stop pressing.
switch:
⇑
or
⇓
to adjust values
If you have changed all datas like you wish, you can start your programm with the start/stop switch.
switch: start/stop
This adjustment that you have made will only used for the present fireing. If you like to store this datas
into the memory, please use the following way:
switch: set Prog
switch: start/stop
Important:
The delay time can not be stored in memory.