5
8
Program Controller RT100D
3. Description of the face
3.1 Using of fixed programs
The control unit RT100D will be delivered with 9 fixed programs all this
programs can be adjusted by the customer.
The following switches should be pressed to start a fixed program.
Prog
sichern
Prog
°C
h:m
Tem p2
Tem p1
Zeit 3
Zeit 2
Zeit 1
Ende
Digital-Display
top-temperature
first temperature
fixed programs
choose of
time and temp
start/stop program
set program to memory
values up
values down
temperature in °C
time in hours : minutes
main switch
fuse
4.0 Use of Program Datas
After you have pressed the start switch the control unit will start the program .
The first point of working is the delay time.After you have programmed the delay time
the controller wait till this time is zero. On the display you will see the value of the
delay time.
The control unit starts the fireing program as soon as the delay time reached zero.
This feature will be used if you like to start a kiln e.g. in the evening.
The fire-process beginns with the ramp time. The control unit calculats the right
heating power to bring the kiln slowly to the firtst set point during the ramp time. If the
ramp time reached zero the kiln will be fired with full power. If the kiln temperature
reached the top temperature the control unit soak during the soak time.
After the soak time the controller switchs the kiln of and the kiln temperature will cool
down.
