background image

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

This Transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter.

 

Any changes or modifications (including the antennas) made to this device that are 
not expressly approved by the manufacturer may void the user’s authority to operate 
the equipment. 
 

Содержание BT-100









Отзывы: