Answering a call
Make sure the phone and the headset are on and connected. When an
incoming call is received, a ring tone will sound in your headset. Press the
“Control Button” on the headset to answer the call.
Transferring a call
To transfer a call from your headset to the phone, press the “Volume-down
－
Button” on the headset for around 3 seconds.
y
Adjusting the volume
Press the “Volume-up + Button” or the “Volume-down
－
Button” to adjust the
volume of headset speaker or ringing tones.
1. To increase the volume: Press the “Volume-up + Button.”
2. To decrease the volume: Press the “Volume-down
－
Button.”
y
Mute function
1. To turn off the microphone or to activate the mute function during a call,
press both the “Volume-up + Button” and the “Volume-down
－
Button” for 1
second until you hear a low tone.
2. Press both the “Volume-up + Button” and the “Volume-down
－
Button”
again to resume the conversation.
Headset LED Indicator
Headset Status
LED Status
Remark
Power On
Blue LED flashes once.
Power Off
Blue LED flashes 4 times.
Paring mode
Blue LED flashes once every 1
second.
Paring succeeds or
talking mode
Blue LED flashes 2 times rapidly
every 2 seconds.
Standby mode
Blue LED flashes once every 4
seconds.
When the battery is
low, the blue light and
the red light will flash
alternatively.
Battery low
Red LED flashes once every 3
seconds. After 1 minute, the
headset turns off.
