manualshive.com logo in svg

HermanMiller Sayl, Руководство пользователя

Поделиться
Скачать
HermanMiller Sayl Скачать руководство пользователя страница 123

Z

© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® 

Y

, 

Z

, SAYL are among the registered trademarks of Herman Miller, Inc.

TM

 Sense, Setu and Tu are among the trademarks of Herman Miller, Inc. 

Illustrations and specifications are based on the latest product information available at the time of publication. 
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 

Part no. 1b7zcp rev A.

1

Y

SAYL

®

 Upholstered Front and Rear Cushion 

Replacement

Steps:

1. Carefully slide fingers 

between front fabric cover 

and frame, pull firmly. Pull 

corners first and then center.

2. Remove rear cushion.

2. Align front fabric cover  to 

snaps in back fabric cover 

and press together starting at 

the bottom. Apply pressure till 

you hear audible clicks  at all 

snap locations.

1. Line up bosses in  new 

back fabric cover to slots in 

frame.

New Front and Rear Cushion Replacement:

Содержание Sayl




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды