HermanMiller Sayl Скачать руководство пользователя страница 106

Страница: 106 / 123

, SAYL are among the registered trademarks of Herman Miller, Inc.

Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b6yxw rev A.

4. Drop seat pad straight

down so that all tabs and

loops are in openings.

3. Using a power driver

with a T-20 torx bit install 2

screws into seat pan so that

they go through slots in the

tabs.

Slot in the tab

Hex Shaped Posts

Screw hole

Snap

5. Push seat cushion rear-

ward until snap engages.

6. Place back over hex

shaped posts and push

down until it seats against

larger round tube.

Larger Round Tube

Содержание Sayl




























































































































Результаты поиска

Содержание Sayl

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Sayl, Руководство пользователя

Результаты поиска

Содержание Sayl

Отзывы:

Бренды по названию

Популярные бренды