Step 7:
Attach drawer handles to drawer fronts. Repeat for all drawers.
Slide drawers into cabinet.
Disassembly for Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non
marked components should be treated as mixed plastic. Ferrous metals
can be identified using a small magnet for recycling. Non-ferrous metals
should be separated and recycled separately. To disassemble product,
reverse the above installation steps
Step 8:
Cap holes in legs without storage using provided plugs.
Step 9:
To route cables down slotted leg, remove cover by pulling on one end. Insert
cables and reinstall cover by pinching ends into slot at one side. Press cover
into slot.
Warranty: For warranty information, visit hermanmiller.com/warranty.
Care and Maintenance: For information on the care and maintenance of your
product, visit hermanmiller.com/care-and-maintenance.
HermanMiller Mode Desk
Assembly Instructions
1BV1DH rev A
3
