HermanMiller Mode Desk
Assembly Instructions
1BV1DH rev A
2
Step 3:
Install power strip bracket on same side as slotted cable leg.
Step 4:
Install remaining legs and tighten all bolts with
wrench.
Do
not over tighten.
Step 5:
Flip desk upright. Level desk with included leveling glides if needed. If
storage, continue with this step.
Loosely fit short bolts into storage legs on desired side. For left storage,
insert one bolt in the bottom of the front and leg and in the top of the
back leg. For
r
ight storage, insert one bolt in the top of the front leg and
the bottom of the back leg.
Note: If no storage, proceed to Step 8.
Step 6:
Lift cabinet onto installed bolts and slide onto desk through keyhole slots.
Secure cabinet in place by bolting second bolt per leg into the upper hole
(aligned with threaded hole in leg). Tighten bolts in keyholes
.
