Z
© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
and Intent are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b59wr rev F.
4
Closed Leg Installation:
1. Attach Mounting Brackets (P) to Panel with 12 Tapping Screws (R).
2. Align Mounting Bracket with Pilot holes in underside of Work Surface.
3. Install Tapping Screws (R).
4. In some desk type, 1/8” dia pilot holes will need to be drilled, 1/2” deep.
P
M
R
R
R
R
R
Pilot Holes
Pilot Holes
