Z
© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
and Intent are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b59wr rev F.
2
Post Leg Installation:
1. Attach Mounting Plate (F) to Post Leg (E) with Flat head screw (H & J).
2. Install Post Leg on to Work Surface with 8 Flat Head Screws (W) 1.00” long bright
zinc plate for all work surface types except for thin edge laminate. Then use 8 flat
head screws black plate (X) 1.25” long. NOTE: Do not use 1.25” black plate screws in
other applications which will result with screw breaking thru the work surface top.
Locate Leg 3/32” in from edge of Work Surface.
3. Install Glide (G) into end of leg.
3/32”
3/32”
H
F
E
J
W
or
X
