13
AVALL-INST-D MAR 2009
17
Fitting cable strain relief
WARNING
English
ELECTRICAL SAFETY
MAINTENANCE and INSPECTION
PATENT and REGISTRATION
• Correct installation is essential to safe and reliable operation of the AVALL product and falls outside the scope of responsibility of Colebrook Bosson Saunders. Please follow assembly instructions carefully.
• Do not use this product for any purpose other than that for which it was designed.
• Ensure that floor or wall surface is strong enough to support the weight of the fully-loaded AVALL and that the floor surface is flat and level.
• Do not install AVALL outdoors or in environments where it will be directly exposed to moisture or high winds.
• Do not install monitors / displays heavier than 50kg/110lb. Total weight of installed equipment must not exceed 100kg/220lb, symmetrically distributed.
• Follow the manufacturer’s guidance for mounting of monitors, displays and other equipment.
• Please take care to avoid trapping fingers when installing or adjusting the product.
• Safe installation of electrical equipment is the responsibility of the installer.
• Colebrook Bosson Saunders recommends that only double-insulated electrical equipment and cables are installed in AVALL unit.
• Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.
• Clean with a damp cloth. DO NOT use solvents.
• Patents and design registration applied for.
1
2
3
1
2
4
USEFUL TIP
If installing electrical extension
leads, use of cable strain relief
is recommended
IMPORTANT NOTE
•Safe installation of electrical equipment is the
responsibility of the installer.
•Colebrook Bosson Saunders recommends that
only double-insulated electrical equipment
and cables are installed in AVALL unit.
x4
x2
x4
