SAFETY INFORMATION
Read and understand all warnings, cautions and instructions before operating this equipment. Caution should be used
when operating this equipment as personal injury and/or property damage can result from equipment misuse. Adequate
personal protection is recommended to prevent splashing of oil on the skin or in the eyes.
MAINTENANCE
Regularly check the pressure filter/regulator moisture trap for water. Drain as required.
Regularly check the waste oil drain line system to prevent oil backing up in the crusher chamber, and causing an oil spill.
Clean, repair, adjust as required.
Regularly clean the crusher chamber to remove any accumulated oil sludge, metal particles or any other debris that
could affect the crusher operation or block the waste oil drain system.
Apply grease to door hinges on a regular basis to prevent the door from binding.
Apply motor oil to door latch pivot points on a regular basis to prevent latch from binding.
REPAIR
No service parts are available for this oil filter crusher. Special tools and procedures are required for repair. If
repair is required, contact Herkules Equipment Corporation Customer Service, (800-444-4351) for your nearest authorized
service center.
SERVICE PARTS
Pneumatic Timer
#008-369
Volume Chamber
#008-379
Limit Valve
#M1
Limit Valve
#M2
Tubing 5/32 black
#M5-BLACK
Tubing 5/32 blue
#M5
Safety Valve
#700-114
Valve 4-Way
#009-141
Valve Exhaust
#008-368
Page 7 of 8
