To keep your machine working efficiently, please follow these directions.
1)
ALWAYS drain excess paint from cup or pot before placing
in gun washer.
2)
Replace Filter/Regulator yearly. (#11345)
3)
Change water completely when objects being cleaned
become tacky to the touch.
4)
Clean inside of tub and intake filter before filling with
cleaning solution.
Do not change the setting of the filter/regulator. This
could damage the filter/regulator or pump.
Troubleshooting
Pump turns on but wash water
1
Make sure wash bucket is not empty.
does not flow.
2
Make sure the filter at the end of the pick up tube is completely submerged
in water.
3
Check all fluid connections to ensure that there are no leaks.
Pump does not turn on.
1
Make sure intake filter is not clogged (Clean or replace).
2
Make sure the air line is properly connected with at least 75 psi.
Air pressure is regulated at 75 psi.
3
Check all air connections to ensure that there are no leaks.
No flow through the manual brush.
1
Make sure wash bucket is not empty.
2
Make sure the filter at the end of the pick up tube is completely submerged
in water.
3
Check all fluid connections to ensure that there are no leaks.
4
Make sure valve handle is not closed all the way.
Possible Solution
Preventive Maintenance
CAUTION
Problem
fig. 5
Filter / Regulator
(#11345)
Page 10 of 16