Troubleshooting
Pump turns on but wash water
1
Make sure wash bucket is not empty.
does not flow.
2
Make sure the filter at the end of the pick up tube is completely submerged
in water.
3
Check all fluid connections to ensure that there are no leaks.
4
Make sure the indicator on the side is set to Clean.
Pump does not turn on.
1
Make sure intake filter is not clogged (Clean or replace).
2
Make sure the air line is properly connected with at least 75 psi.
Air pressure is regulated at 75 psi.
3
Check all air connections to ensure that there are no leaks.
No flow through the manual brush.
1
Make sure wash bucket is not empty.
2
Make sure the filter at the end of the pick up tube is completely submerged
in water.
3
Check all fluid connections to ensure that there are no leaks.
4
Make sure the indicator on the side is set to Clean.
5
Make sure ball valve is open.
Possible Solution
Problem
Page 11 of 16
