HERKULES G100, Руководство пользователя

Страница: 4 / 19

FIRE AND EXPLOSION HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition
and result in fire or explosion and serious injury.
•
Ground the equipment. See Installation for grounding procedure.
•
Provide fresh air ventilation to avoid the build up of flammable fumes from the solvent.
•
Extinguish all open flames or pilot lights in the gun washer area.
•
Disconnect all electrical equipment in the gun washer area.
•
Keep the gun washer area free of debris, including solvent, rags, and gasoline.
•
Do not turn on any light switch in the gun washer area while operating or if fumes are present.
•
Do not smoke in the gun washer area.
•
Do not operate a gasoline engine in the gun washer area.
•
Follow the gun manufacturer's solvent and other cleaning recommendations.
•
Use solvent with the highest possible flash point.
•
If there is any static sparking while using the equipment, stop operation immediately. Identify and
correct the problem.
•
Drain the cleaning solution into a proper storage container when gun washer(s) is not in use.
TOXIC FLUID HAZARD
WARNING
Page 4 of 19
TOXIC FLUID HAZARD
Hazardous fluids or toxic fumes can cause serious injury or death if splashed in eyes or on the
skin, swallowed, or inhaled.
•
Know the specific hazards of the fluid you are using. Read the fluid manufacturer's warnings.
•
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state
and national guidelines.
•
Wear the appropriate protective clothing, gloves, eyewear and respirator.
•
Pipe and dispose of the exhaust air safely. If diaphragm fails, the fluid may be exhausted along with
the air.
WARNING
Page 4 of 19