HERKULES G100, Руководство пользователя

Страница: 11 / 19

Gun washer will not turn on.
1 Make sure the air line is properly connected with at least 75 psi.
Air pressure is regulated at 75 psi.
2 Make sure lid is fully closed. Make sure the lid rod actuator is making
full contact with the limit valve on the right rear leg.
3 Check all air connections to ensure that there are no leaks.
4 Make sure timer cam is engaging the limit valve on the right front leg.
5 Make sure timer is on and functioning correctly.
Gun washer turns on but 1 Make sure intake filter is not clogged (Clean or replace).
pumps slowly or not at all.
2 Make sure the air line is properly connected with at least 75 psi.
Air pressure is regulated at 75 psi.
3 Check all air connections to ensure that there are no leaks.
4 Make sure there is at least 4 gallons of cleaning solution in the can.
5 Make sure the siphon hose is far enough into the can to draw cleaning solution.
Possible Solution Problem
Troubleshooting
Page 11 of 19
6 Make sure lid is fully closed. Make sure the lid rod actuator is making
full contact with the limit valve on the right rear leg.
7 Make sure manifold nozzles and stem supports are not clogged.
Gun washer will not shut off 1
Make sure timer cam is moving. If it's not, slightly loosen the nuts
holding the limit valve on the right front leg of the stand. Reposition
valve and tighten nuts.
2
Make sure limit valves located on the right front leg or right rear leg
of the stand are not stuck in closed position.
Page 11 of 19