Herkules Hebetechnik GmbH HLS 1200-11, Руководство по эксплуатации и журнал испытаний

Страница: 17 / 44

I
NSTALLATION AND
A
SSEMBLY
17
No
.
HLS1200-11 Description Material requirements
6

Run in cantilever 2x Cantilever HLS1200-11
7

Run lifting platform in
the upper end position.
(Operator control
module: Open stopcock
/ hand-operated lever in
the switch position „on“).
8

Screw together
cantilever with the
platform main body.
6x Hexagon screw M12x40
6x Nut M12
12x Ring washer 13mm
Important:
Insert screws from the inside!
9

Install roll-off protection /
stop side
(Notice running
direction).
2x Plate roll-off protection
4x Hexagon screw M10x30
4x Nut M10
8x Washer 10.5mm
10

Ramps holder /
running side.
(Notice running
direction).
2x Plate roll-off protection
4x Hexagon screw M10x30
4x Nut M10
8x Washer 10.5mm