Maintenance cont.
We advise that your fitting is regularly serviced in
hard water areas to maintain optimum
performance; see map of Hard Water Regions on
page 07.
If your fitting begins to leak the following should
be carried out;
Isolate both hot and cold water supplies to the
tap by either:
•
Turning the water supply off at the mains
stopcock or
•
Turning off the isolation valves to the tap.
1. Remove the indice at the top of the handle
to reveal the concealed screw.
2. Remove the screw and pull the handle
upwards from the spline adapter and valve.
3. Using a suitable spanner remove the valve
from the tap body.
4. Clean the valve and the seating inside the tap
body.
5. If necessary replace the valve.
Please visit www.heritagebathrooms.com in
order to find spare parts for this product.
6. Replace the valve into the tap body and
tighten fully using a suitable spanner.
7. Re-connect handle assembly.
8. Turn on water supply and check for leaks.
9. Contact our helpline should if problem
persists.
Cleaning the Valves Within The Side Bodies
Spline Adapter
Valve
Tap Body
Handle
Indice
Screw
06
www.divapor.com
