hergom SERE 100, Инструкции по установке, использованию и обслуживанию, Страница: 23 / 52

23
The use of one or more heating devices in the same
room reduces the level of available oxygen, affecting
the combustion of the fireplace and reducing the draw
of the chimney.
If you should detect any overheating of the fireplace
caused by:
Fan breakdown. Faulty thermostat.
The fire must be put out to avoid possible damage to
the compact fireplace and to its coating. Follow these
recommendations:
•
Do not add any more fuel
•
Open the door slightly to let more air in; this will
cause the flames to grow and consume the fuel
more quickly but will also cool the chimney and
reduce draw, cooling the appliance.
The compact SERE has been designed to operate using
intermittent combustion processes.
5 - CLEANING
THE GLASS PANE
Fireplace window cleaning liquids are effective
products.
Never try to clean the glass while the fireplace is
working. We recommend using HERGOM window
cleaning products.
Replacing: the glass pane in your fireplace is made of
thermal material, especially manufactured for log
and/or coal fireplaces. If it should break due to an
accident, it must be replaced by another glass pane with
the same technical specifications. Contact our
Distributor to provide you with the appropriate glass
pane, together with instructions on how to assemble
and seal it.
BAFFLE PLATES
Clean the baffle plates on both sides at least once each
season using a brush. This will facilitate the transmission
of air through the plate and avoid its deterioration to a
great extent.
To proceed with the disassembly of the baffles, consult
section 7. Once the cleaning has been carried out,
reassemble the baffles following the steps described in
the reverse order.
JOINTS AND SEALS
It is advisable to perform a visual inspection of the door
joints at the beginning and in mid-season to ensure they
are airtight. If necessary, contact our Distributor to
supply you with the appropriate seal, along with
assembly instructions.
6 – PRODUCT RECYCLING
Your appliance is delivered packed in plastic and a
cardboard box on a wooden pallet. You can use
cardboard and wood as fuel for the first lightings of the
appliance, or take it to a local recycling point. The plastic
that protects the device must be taken to a specific local
recycling point or center, it must not be disposed of in
conventional waste dumpster.
All local regulations, including those that refer to
national or European regulations, must be applied when
recycling this device at the end of its useful life. The
product should never be disposed of in conventional
waste dumpster. Its appliance is made up of
components made of cast iron, steel, glass, insulating
materials and electrical material, which are assembled
using screws and rivets. You can disassemble it and take
it to a specific local recycling point or center. Glass
should not be disposed of in conventional waste
dumpster.