Page 6
For technical questions, please call 1-888-866-5797.
Item 57275
Specifications
Battery Rating
Hercules 20 V Li-ion
(sold separately)
Cord-connected
Electrical Rating
120VAC / 60Hz / .22A
Functional Description
3
2
1
1. Power/Speed Control Knob
2. 120VAC Input Plug
3. Battery Pack
OPERATION
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Tool Set Up
Battery Charging
Charge battery before using this tool. Follow instructions
included with battery charger (sold separately).
General Operation
Choose Power Supply
1.
Battery Pack:
Insert fully charged Battery Pack into
back of Fan, making sure it clicks into place securely.
2.
120VAC Extension Cord:
a. Remove Battery Pack from Fan.
b. Connect the extension cord to the
120VAC Input on back of Fan.
c. Plug the other end of the extension cord
into a grounded 120VAC outlet.
Fan Placement
CAUTION!
Keep Fan and cord out of walkways.
NOTICE:
Select a suitable location for hanging the Fan.
The Fan must be hung from a sturdy mounting location
able to support the weight of the Fan and Battery.
1.
Freestanding:
Place Fan on a flat surface.
2.
Hook:
Lift Hook from slot and hang
carefully in selected location.
3.
Wall Mount:
WARNING!
Verify that installation surface has no
hidden utility lines before drilling or driving screws.
WARNING!
Do not install the Fan directly into drywall.
a. Choose two adjacent studs. If drywall is
present, use a stud finder (sold separately)
and mark locations of studs.
b. Install a 2x6 across the studs.
c. Measure the distance between the
four keyholes on the Fan and mark
mounting locations on the 2x6.
d. Drill holes into the mounting locations,
then drive screws into holes, leaving
1/4″ of threads exposed.
e. Place large openings on keyholes over
screws. Pull down gently to lock screws
into upper parts of keyholes.
Keyholes
Note:
For other types of walls, use appropriate
hardware.