Page 10
For technical questions, please call 1-888-866-5797.
Item 56459
General Operation
TO PREVENT SERIOUS INJURY: Grip
the tool firmly in both hands.
1. Pull back on the Safety Lock and pull Paddle Switch
upward to start the tool. For continuous operation
depress the Switch Lock on the left side of the tool.
To turn tool OFF, toggle the Safety Lock and the
Paddle Switch will be released to the OFF position.
2. Allow the tool to come up to full speed
before touching the work material.
For grinding or sanding operations,
apply the
wheel or disc to the work material at a 10°–
15°
angle, allowing the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
To create a smoother surface, keep the
tool moving over the work surface.
For abrasive cutting-off operations,
apply the cut-off wheel straight into the work
material using only the edge of the wheel,
allowing the tool to operate at full speed. If
the tool bogs down, use lighter pressure.
WARNING: Do not grind with the side of
the cut-off wheel.
Abrasive cut-off wheels are
intended for peripheral grinding; side forces applied
to these wheels may cause them to shatter.
NOTICE:
TO PREVENT TOOL DAMAGE:
Only use the tool for 15-20 minutes at a time.
Allow the tool to cool completely before next use.
3.
TO PREVENT ACCIDENTS, AFTER USE:
Turn off the tool.
WARNING! Allow the tool to come to a complete
stop before setting it down.
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.
