Hercules HCRG-JACK48, Руководство пользователя, Страница: 5 / 8

Plan location of jack, make sure jack will be contacting a flat area of vehicle. Consult vehicle
owner’s manual for location of jack support areas. Never use on curved or tubular surfaces as
these can more easily slide of the jack causing the load to fall leading too property damage
personal injury or even death.
Lifting a vehicle using a jack can be dangerous. Follow all instructions
and precautions below. Do not lift any vehicle with its engine running
or start any vehicle that is supported by jack or jack stands.
With lifting nose completely lowered, place jack into position beneath
a suitable jack support area of vehicle.
Engage the jack by pulling up on the ratchet control lever
Pump jack handle slowly until lifting nose just begins to contact support area on underside of
vehicle.
Inspect position of lifting nose beneath support area, making sure it is centered and properly
engaging support area.
Check the base is firmly on the ground capable of holding the weight. A plate (not included)
of material able to hold the weight can be used to spread the load over a larger area.
The load will be lifted on each down stroke of the handle; the load will push up against the
handle on each stroke, keep head and body away from the path of the handle, if your hands
should slip off the handle it may fly up causing serious injury or death.
Continue pumping handle slowly with both hands on the handle until vehicle is lifted to desired
height.
Pay attention to lifting nose position as vehicle is being raised to be sure there is no danger of
support area slipping off.
Any vehicle being supported by a jack creates a potentially hazardous working environment.
Do not try to move a vehicle that is supported by a jack and that no person should place
any portion of their body under a vehicle that is supported by a jack. Be careful of forces
applied to vehicle such as torque on a nut or bolt. These forces could cause vehicle to
become unstable. Do not turn vehicle ignition or attempt to start any vehicle supported by
jack.
Lifting Vehicle
Working on Vehicle
8.) Be sure jack and vehicle are on solid, dry, and level ground so upright is pointing straight up . Uneven
sloped or soft surfaces create hazardous working conditions and dangerously impeded the function of
the jack.
9.) With vehicle in proper position, set vehicle ’s parking brake or emergency brake and put gearshift in park
(manual transmissions should be placed in lowest gear). TURN VEHICLE IGNITION OFF AND TO THE
“LOCK” POSITION making sure steering wheel locks.
10.) Do not rely on vehicle transmission or brakes to hold vehicle in position. Chock all wheels of vehicle not
being lifted off the ground to prevent vehicle rolling. Using wedge-shaped blocks that tire cannot roll
over, position one chock tight against the tyre in both forward and reverse rolling path s.
11.)Plan location of jack, make sure jack will be contacting a flat area of vehicle. Consult vehicle owner’s
manual for location of jack support areas. Never use on curved or tubular surfaces as these can more
easily slide of the jack causing the load to fall leading too property damage personal injury or even
death.
Lifting Vehicle
Lifting a vehicle using a jack can be dangerous. Follow all instructions and
precautions below. Do not lift any vehicle with its engine running or start any
vehicle that is supported by jack or jack stands.
1.) With lifting nose completely lowered, place jack into position beneath a
suitable jack support area of vehicle.
2.) Engage the jack by pulling up on the ratchet control lever
3.) Pump jack handle slowly until lifting nose just begins to contact support area on underside of vehicle.
4.) Inspect position of lifting nose beneath support area, making sure it is centered and properly engaging
support area.
5.) Check the base is firmly on the ground capable of holding the weight. A plate (not included) of material
able to hold the weight can be used to spread the load over a larger area.
6.) The load will be lifted on each down stroke of the handle; the load will push up against the handle on
each stroke, keep head and body away from the path of the handle, if your hands should slip off the
handle it may fly up causing serious injury or death.
7.) Continue pumping handle slowly with both hands on the handle until vehicle is lifted to desired height.
8.) Pay attention to lifting nose position as vehicle is being raised to be sure there is no danger of support
area slipping off.
Working on Vehicle
Any vehicle being supported by a jack creates a potentially hazardous working environment.
Do not try to move a vehicle that is supported by a jack and that no person should place any portion of
their body under a vehicle that is supported by a jack . Be careful of forces applied to vehicle such as
torque on a nut or bolt. These forces could cause vehicle to become unstable. Do not turn vehicle ignition
or attempt to start any vehicle supported by jack.