Hercules HCRG-JACK48, Руководство пользователя, Страница: 3 / 8

IMPORTANT SAFETY INFORMATION
The use of a vehicle jack has inherent dangers to avoid risk of personal injury or property
damage make sure you are fully aware of the operating instructions for this product, the
recommendations in the vehicle owners manual for jacking of your vehicle prior to lifting
the vehicle. Do not exceed maximum lifting capacity of this jack. This jack is intended
for automotive use only. Be aware that large or heavy vehicles may exceed jack’s stated
capacity check vehicle owners manual or contact the vehicle manufacturer. Do not use
for vehicle maintenance or wheel removal, a high lift jack is designed for aiding in vehicle
recovery and winching. Never use to raise any structure or building, Do not lift any human load
and do not get under a raised vehicle.
Unpacking Carton
Place carton in a clear, open area such as garage floor. Remove jack from carton. No pre-
assembly is required so please take this time to familiarise yourself with the jack, its function and
these operating instructions
Testing Operation
Briefly test jack operation as follows
BEFORE using to lift any Load.
Step 1 place jack on a firm level
surface.
Step 2 place ratchet control lever in
the lifting position
Step 3 raise the lifting nose by gently
pumping the handle up and down.
The jack will click in and out as the
lifting pins engage and disengage
with the jack with each up and down
stoke of the jack.
Danger: the handle becomes
weight bearing during the lifting
and lowering process.
Caution: this jack must have a
minimum load of 50 kg on it to
lower step by step, otherwise the
lifting mechanism will slide down
to the base plate dropping your
vehicle.
UNPACKING AND ASSEMBLING JACK