Page 9
For technical questions, please call 1-888-866-5797.
Item 58260
SAFET
Y
O
PERA
TION
M
AINTENANCE
SETUP
Functional Description
1. Auxiliary Handle
2. Spindle Lock
3. Paddle Switch
4. Wheel Guard
5. Wheel Guard Lock Lever
6. Grinding Wheel
7. Battery (sold separately)
2
1
3
4
5
6
7
OPERATION
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure that the Paddle Switch is in the
off-position and remove its Battery Pack before
performing any procedure in this section.
Note:
For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Charging
Charge battery before using this tool.
Follow
instructions included with battery charger
Battery Pack and Charger sold separately.
Adjusting the Wheel Guard
TO PREVENT SERIOUS INJURY:
Do not operate this tool without the
Wheel Guard properly installed.
1. Pull out Lock Lever.
2. Slide the collar of the Wheel Guard
over the rim of the Gear Housing.
3. Rotate the Wheel Guard as needed to
shield you during the planned work.
4. Push in Lock Lever.
5. Check the Wheel Guard to ensure
it is firmly in place. Adjust if
necessary before proceeding.
Clamp
Handle
Wheel
Guard
Installing Side Handle
\
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or
without the Side Handle properly installed.
1. The Side Handle may be installed in one of two
positions, on either side of the Gear Housing.
2. Screw the threaded end of the Side Handle
clockwise into the selected position.
Tighten securely before beginning work.
Side Handle
Socket
Side
Handle
