Hercules Fazua Futura, Руководство по эксплуатации

Страница: 37 / 87

MY21H05-2_1.0_30.11.2020
37
Operation
6.4 Error messages
The status screen indicates a status change or an
existing fault. The status indicator does not light
up if no fault is detected.
The different colours of the status screen have the
following meaning:
 Please contact your specialist dealer
immediately in the case of an ongoing "soft
fault" or a "hard fault".
Colour Meaning
Green
The status screen flashes green briefly after the
drive pack has been successfully installed into the
pedelec. This gives you a visual signal that the
system can now be switched on.
Yellow
The status screen turns yellow briefly when a "soft
fault" is detected. This means that there is a
temporary or non-critical disturbance, which in most
cases leads to a loss of performance. You can still
ride your pedelec even if a "soft fault” occurs.
However, this is not recommended.
Red
The status screen briefly turns red when a "hard
fault" is detected. The pedelec can no longer be
used and must be serviced if a "hard fault” occurs.
Table 27: Meaning of status screen colours
"Soft faults" on the pedelec are most commonly
caused by data missing from the speed sensor.
In the case of a permanent "soft fault", you can
re-install the speed sensor magnets. If the
problem persists, please contact your FAZUA
service partner or visit the FAZUA service
platform (www.fazua.com/service).
For a permanent "hard fault", please contact your
FAZUA service partner or visit the FAZUA service
platform (www.fazua.com/service).