manualshive.com logo in svg

Hercules Cargo 1000, Руководство по эксплуатации, Страница: 97 / 228

Поделиться
Скачать
Hercules Cargo 1000 Скачать руководство пользователя страница 97

034-11572_1.0_29.08.2018

95

Operation

7

Operation 

 

Crash caused by loose clothing

Laces, scarves and other loose items may become 
entangled in the spokes on the 

wheels

 and the 

chain 

drive

. Such damage may cause you to fall from the 

bicycle and injure yourself.

Wear sturdy footwear and close-fitting clothing.

Crash caused by soiling

Heavy soiling can impair the functions of the bicycle, 
for example, the function of the brakes. Such damage 
may cause you to fall from the bicycle and injure 
yourself.

Remove coarse soiling before riding.

Crash caused by poor road conditions

Loose objects, such as branches and twigs, may 
become caught in the wheels and cause a crash with 
injuries.

Be aware of the road conditions.

Ride slowly and brake in good time.

When riding downhill, high speeds may be reached. 
The bicycle is only engineered for exceeding a speed 
of 25 km/h briefly. In particular the 

tyres

 can fail if 

exposed to a continuous load.

Decelerate the bicycle with the brakes if higher 
speeds than 25 km/h are reached.

Heat or direct sunlight can cause the 

tyre pressure

 to 

increase above the permitted maximum pressure. This 
can destroy the 

tyres

.

Never park the bicycle in the sun.

On hot days, regularly check the 

tyre pressure

 and 

adjust it as necessary.

CAUTION

!

CAUTION

!

CAUTION

!

NOTICE

NOTICE

EN_034-11572_1.0_09.18_HERCULES BOSCH_Inhalt.book  Page 95  Wednesday, August 29, 2018  6:21 PM

Содержание Cargo 1000





































































































































































































































Отзывы:

Нет отзывов