manualshive.com logo in svg

Hercules Cargo 1000, Руководство по эксплуатации, Страница: 81 / 228

Поделиться
Скачать
Hercules Cargo 1000 Скачать руководство пользователя страница 81

034-11572_1.0_29.08.2018

79

Before the fist ride

6

Before the fist ride

Only a correctly adjusted bicycle will guarantee you 
the desired ride comfort and health-promoting activity. 
Therefore adjust the 

saddle

, the 

handlebars and the 

suspension 

to your body and your preferred riding style 

before the first ride.

6.1

Adjusting the saddle

6.1.1

Adjusting the saddle tilt

The saddle tilt must be adjusted to the seat height, the 
saddle and handlebar position, and the saddle shape 
to ensure an optimum fit. The seating position can be 
optimised in this way if needed. First, readjust the 
saddle after finding the handlebar position you prefer.

Crash due to incorrectly adjusted torques

If a screw is fastened too tightly, it may break. If a 
screw is not fastened enough, it may loosen. This will 
result in a crash and injuries.

Always observe the indicated torques on the screw 
or in the operating instructions.

CAUTION

!

EN_034-11572_1.0_09.18_HERCULES BOSCH_Inhalt.book  Page 79  Wednesday, August 29, 2018  6:21 PM

Содержание Cargo 1000





































































































































































































































Отзывы:

Нет отзывов