Page 11
For technical questions, please call 1-888-866-5797.
Item 57348
General Operation
TO PREVENT SERIOUS INJURY: Grip
the tool firmly in both hands.
1. Make sure that the Trigger is not
locked on, then plug in the tool.
2. To start the tool, push Lever forward and
squeeze the Trigger. To turn tool OFF, release
the Trigger. For continuous operation, push
Lever forward and squeeze the Trigger, and
then depress the Trigger Lock. To turn tool
OFF, squeeze the Trigger to release the
Trigger Lock and then release the Trigger.
Trigger
Lever
Trigger
Lock
3. Allow the tool to come up to full speed
before touching the work material.
For grinding or sanding operations,
apply the
wheel or disc to the work material at a 10°– 15°
angle, allowing the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
To create a smoother surface, keep the
tool moving over the work surface.
For abrasive cutting-off operations,
apply the cut-off wheel straight into the work
material using only the edge of the wheel,
allowing the tool to operate at full speed. If
the tool bogs down, use lighter pressure.
WARNING! TO PREVENT SERIOUS
INJURY: Do not grind with the side of the cut-
off wheel.
Abrasive cut-off wheels are intended
for peripheral grinding; side forces applied to
these wheels may cause them to shatter.
NOTICE:
TO PREVENT TOOL DAMAGE:
Only use the tool for 15-20 minutes at a time.
Allow the tool to cool completely before next use.
4.
TO PREVENT ACCIDENTS, AFTER USE:
Turn off the tool.
WARNING! TO PREVENT SERIOUS INJURY:
Allow the tool to come to a complete stop before
setting it down.
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.
